Riley N Posted April 11, 2023 Report Share Posted April 11, 2023 So i have a Canadian 1948 Dodge Deluxe so basically a Plymouth, IT IS NOT A FLUID DRIVE considering it’s Canadian, i have determined that the clutch it’s a 10 inch disc and 10 splines but i don’t know the input shaft size does anyone happen to know? Quote Link to comment Share on other sites More sharing options...
Dartgame Posted April 11, 2023 Report Share Posted April 11, 2023 are you talking about the pinion diameter or the spline diameter ? Pinion is 3/4 " and the spline is 1 inch, I believe. Use a mic and check to be sure. Quote Link to comment Share on other sites More sharing options...
Riley N Posted April 11, 2023 Author Report Share Posted April 11, 2023 2 minutes ago, Dartgame said: are you talking about the pinion diameter or the spline diameter ? Pinion is 3/4 " and the spline is 1 inch, I believe. Use a mic and check to be sure. spline diameter and thank you Quote Link to comment Share on other sites More sharing options...
Saskwatch Posted April 11, 2023 Report Share Posted April 11, 2023 Probably , the best way to avoid disappointment, is to take the old one out & measure it all up….. you will have to do it sooner or later , will also find out if there is anything else that needs to be replaced ? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.