Clutch Fork Bearing

[SSGRHYMER]

Hello

I am working on my clutch adjustment. for the WC 52.

When I push the Pedal, the fork Rod  moves back and forth in the flange, as it rotates. 

It is right behind the pedal. It appear there is a lot of play.

The bearing could be worn out? If so, can it be changed out without tacking the transmission out and Clutch assembly?

 

It looks like two bolts hold the flange and should slip off. I want to be sure and not get into a bigger mess.

 

any advice would be great!!!

Thanks

 

 

[Jerry Roberts]

This is what you are talking about right ?   The clutch fork is loose where it goes through the bell housing ?

[SSGRHYMER]

Thank you so much. This is perfect!!!!!

Cheers

Curt