Bob Pelikan Posted April 15, 2020 Report Posted April 15, 2020 I'm rebuilding the steering column on my 54 Bel;vedere and the 6 wires coming off the turn signal switch have lost their color so I'm not sure which wire goes where on the little bakalite half moon switch. Can someone please advise identify them by number acccording to the drawing below that I copied from 2013 post. Quote
grea235 Posted April 16, 2020 Report Posted April 16, 2020 This may or may not help. I just wired in a turn signal into my 52 Concord. I made a schematic for it. I replaced the wires, so i don't have the original color codes, sorry. It was funny...when I first wired it up, my brake lights didn't work. Then it dawned on me, I looked at the front of the car then stepped on the brakes and my front lights came on. Switched the wires front to back and everything worked fine. The attached schematic is what I ended up with. My labeling is different tho. 2 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.