seanpt105 Posted April 20, 2018 Report Posted April 20, 2018 got my carb cleaned and rebuilt recently trucked fired right up after that and new plugs, idle screw was way out i turned it in until truck almost stalled then backed it out half a turn, issue im having is when hitting the throttle i get lots of smoke out the back and it seems like its running very rich old plugs were black and fouled and the fumes are enough to make your eyes water. is there another adjustment im missing? it seems like its dumping to much gas when off idle circuit. Quote
Dozerman51 Posted April 21, 2018 Report Posted April 21, 2018 Have you used a vacuum gauge to adjust the mixture setting? You want the highest vacuum with a steady to very very little little fluctuating needle at idle. Is the float set to the proper height? Quote
seanpt105 Posted April 21, 2018 Author Report Posted April 21, 2018 carb shop set float. no i havent used a vacuum gauge, the vacuum line for the wipers is broken. do i adjust the same screw? the one at the base of the carb i can turn by hand? Quote
Don Coatney Posted April 21, 2018 Report Posted April 21, 2018 3 hours ago, seanpt105 said: carb shop set float. no i havent used a vacuum gauge, the vacuum line for the wipers is broken. do i adjust the same screw? the one at the base of the carb i can turn by hand? Suggest the first thing you do is replace the vacuum line for the wipers. The engine will never run correctly with such a huge vacuum leak. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.