Woody Branham Posted July 22, 2007 Report Posted July 22, 2007 Yanked the genny from the p11 a few days ago to check it out. Sanded the commutator with fine paper ang cleaned the grooves with the tip of a knife. The brushes were hardley worn but the wires did not look so good. Took it today and had a parts store put it on their machine to spinn it for me. I tester it with my meter while spinning and got 0 volts. Quote
Christopher Posted July 22, 2007 Report Posted July 22, 2007 Hey Woody,, I don't know what there called ,,,But the bundle of wires that had a coating on them. I had some bare ones used finger nail polish on the bare spots then it worked...Christopher.... .. Quote
Normspeed Posted July 23, 2007 Report Posted July 23, 2007 Woody, when you had it opened up did you see any sign of solder spattered around inside the case? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.