55 Fargo Posted July 15, 2007 Report Posted July 15, 2007 Hi All, yesterday when I went to move my 47 Chrysler out of the garage, the clutch pedal stuck to the floor. I removed the floor plate, got the clutch free, and it was working once again. Tonight, the same thing happens. What is causing this. A little history, I have a slow antifreeze leak at the back of the engine, there was antifreeze and crud in the bell housing, the release bearing had greasy goop all over it. I have not had a chance to pull the trans and clutch to repair the leak and to clean up inside the bell housing. I did vacuum out the area, got as much crud as I could from the outside. But why would this cause my clutch to stick in the pedal:confused: down position. Any ideas what I need to do to correct all of this.........Fred Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.