MartinsB3B Posted January 9, 2015 Report Posted January 9, 2015 (edited) I've tried searching and havent had much luck. So I got my transmission back from the shop yesterday, now to work on the handbrake handle. The transmission is a 3 speed floor shift from a '37 dodge pickup. I need to know how to disassemble the handle, and replace the button return spring. Also need the springs in the band. I have found a few pdf's and gotten some old part numbers, but they haven't turned anything up. And if anyone else knows what the thread pitch/size of the shifter is. Edited January 9, 2015 by MartinsB3B Quote
MartinsB3B Posted January 10, 2015 Author Report Posted January 10, 2015 That picture will come in handy,my handbrake has the handle mounted on the side of the transmission. Thanks Quote
Fernando Mendes Posted January 10, 2015 Report Posted January 10, 2015 I have a handbrake lever pic under the dash.I tried to send yesterday without success. Quote
MartinsB3B Posted January 10, 2015 Author Report Posted January 10, 2015 Exactly what I need! Thank you!anyway to cross this part number over? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.