navyboy Posted May 6, 2014 Report Posted May 6, 2014 I have the carb at home torn down and soaking to be cleaned and have a rebuild kit that just came in today, I know how to put her all back together but I cant figure out what settings per spec for two things. I know what the float is to be set. Its a d6h2 carb. Now it has a plunger on the idle screw side and I need to know what the measurement for that is, I know its suppose to freely go up and down and at what points I make this measurement, I also need the measurement of travel for the other plunger on the opposite side. Thanks guys!!!!Float bowl is to my understanding 5/64 +- so much. Quote
hendo0601 Posted May 6, 2014 Report Posted May 6, 2014 My rebuild kit came with a small right angle ruler and a list of specs for plunger travel, float level, etc. I will dig it out and see what it says...I believe it is supposed to be something like 3/8" of total travel from completely closed to completely open. Quote
navyboy Posted May 7, 2014 Author Report Posted May 7, 2014 Thanks, got it figured out and rebuilt, runs like a dream. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.