Need a blue print of the 1940 steering shaft seal

[Rodney Bullock]

I talked to the Shrock brothers today and they said that the examples we gave were missing to much detail. He asked me if any of you could have access to a blue print of the seal. I guess this means the measurements. They said the examples we gave them did not have enough material show where the center of the seal was or where the shift rod came thur. If anyone has acess to these measurements please let me know because with this we can get them made rather quickly. Thanks all.

[Bob Riding]

Rodney,

Are you referring to the one that is internal to the steering column or external nearer the steering box?

Bob R

[Rodney Bullock]

The seal I am talking about is the one on the floor that the steering mask comes though. The seal is screwed to the toe board. The shift rod and the steering mask goes though it. The guy's that can make it say they need the measurments, The centering for the holes. The samples we sent were to far gone.

[Bob Riding]

The seal I am talking about is the one on the floor that the steering mask comes though. The seal is screwed to the toe board. The shift rod and the steering mask goes though it. The guy's that can make it say they need the measurments, The centering for the holes. The samples we sent were to far gone.

I have an intact one on my P9. I'll see what I can do.

[Rodney Bullock]

Thanks Bob, I know I can get these reproduced if I can get the proper measurements.

[Bob Riding]

I hope this will work. If not, I'll try to remove my steering wheel and column shifter and see if it will come out intact.

 

 

 

 

 

 

 

 

 

 

 

 

[Rodney Bullock]

Bob, thanks so much. I will submit this and see what happens. again thanks.