Flatty52 Posted August 30, 2012 Report Posted August 30, 2012 Hello All. It's been awhile since I checked in. I have a 1952 Cranbrook that needs brake work to pass a safety inspection. The info. I was hoping to find is; the specs for turning the drums ie; minimum wall thickness before the drums must be replaced and location of either new wheel cylinders or repair kits. I'll need all four corners done and should mention that I'm located in Alberta Canada. As always any help would be much appreciated. Quote
jcmiller Posted September 4, 2012 Report Posted September 4, 2012 These guys may be able to help: http://www.hagensautoparts.com/1952/PLYMOUTH/P23+Cambridge%2C+Cranbrook+118.5wb/BRAKE+-+Cylinders%2C+hoses%2C+kits+%26+shoes/All/ Quote
Flatty52 Posted September 18, 2012 Author Report Posted September 18, 2012 Thanks very much for the info. Will be contacting these guys asap. Thanks again. BMc Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.