One wire alternator bracket for P18

[GeorgeLeonard]

Can anyone tell me where to go to buy a bracket to convert my generator to an alternator? (1949 Plymouth 218 engine) Everyone tells me to just fabricate one but it turns out that I am not that talented. I searched through the archives but all the links I found were out dated. I know you can buy them for Chevy sixes but does anyone know how I can locate a Mopar one? Thanks for any suggestions.:)

[Andydodge]

George, apart from fabricating an alternator bracket from scratch you can use the original generator bracket and use a piece of "3/8th all thread" long enough to go between the 2 generator bracket arms that the generator bolts onto.

Then you'll need a few 3/8 nuts and adjust the allthread so that its held tight onto the alternator arms then tighten the extra nuts on the allthread to hold onto the generator bracket nuts.........does this make sense?........lol........hope so.........andyd

[48mirage]

Here is an example. There will be others supplying the same kit.

http://www.ebay.com/itm/Universal-Generator-Alternator-Conversion-Bracket-/230842387342?pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr&hash=item35bf474b8e

[48mirage]

Here is a summary of similar items from ebay

http://www.ebay.com/sch/sis.html?_kw=Universal+Generator+to+Alternator+Conversion+Bracket&_id=230842387342

[40P10touring sedan]

Here is a summary of similar items from ebay

http://www.ebay.com/sch/sis.html?_kw=Universal+Generator+to+Alternator+Conversion+Bracket&_id=230842387342

...sure, no AC mounts for a flathead 6....