grey beard Posted April 24, 2007 Report Posted April 24, 2007 I am in desperate need of a piece of floor metal to finish my B1B Pilothouse cab. I have pieces from Montana and South Dakota welded together and have repaired all the rust problems in the cab with one exception. I need the floor piece that holds the accelerator pedal. It is 51 ½ inches wide and 7 inches tall, and fits across the main floor boards at the front of the transmission floor cover. The two front trans cover bolts fit into this part. Mine is missing nearly a foot at each end and will be quite difficult to reproduce if I cannot find one. The piece I need fits below the piece that holds the dimmer switch. Anybody have a parts truck that still has this piece intact? I have discovered that larger trucks – 1/12 or 2 ton – use a different trans cover and cutout, so I’m stuck looking for this part from a half or three quarter ton truck. Any help or suggestions will surely be appreciated. :) Thanks for your time. Quote
Reg Evans Posted April 24, 2007 Report Posted April 24, 2007 Dave, Are either of these the piece? It's been a while since I have removed my floor mat. Quote
Reg Evans Posted April 25, 2007 Report Posted April 25, 2007 Dave, PM your address to me. It's yours for the shipping. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.