rockerbillykat Posted January 15, 2011 Report Posted January 15, 2011 Hi all,at the moment i am in the process of stripping down my motor to fit all new gaskits and seals. The problem i have come up against is, when removing the manifolds i managed to break off one of the long bolts that fit in the exhaust manifold, under the intake manifold.These two bolts fit either side of the "hot box"where both manifolds bolt together. What i need help with is,what size thread are these bolts. I have managed to drill out what was left of the old bolt with out doing any damage. As soon as i can find out the bolt size i can re tap the thread and buy some new bolts so it all snugs up nice again! Thanks,Rockerbillykat. Quote
moose Posted January 15, 2011 Report Posted January 15, 2011 All of the studs and bolts for the manifolds are 3/8x16 standard coarse. Good luck:) Quote
rockerbillykat Posted January 15, 2011 Author Report Posted January 15, 2011 Thanks for the reply Moose,that helps me alot,i can get the right size tap and bolts now. Thanks again. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.