azmichael1 Posted April 17, 2010 Report Posted April 17, 2010 Just yesterday I received a new two wire sending unit for my '48 p-15 with 6 volt system,but there were no installation instructions or diagrams with it.....since I don't know for sure that the one in the car now is installed properly and the manual is not specific, I am hoping someone here might have a diagram or a pic of the top of the unit as it appears installed. THANKS Mike Quote
azmichael1 Posted April 17, 2010 Author Report Posted April 17, 2010 Thanks (again) for sharing your wisdom......the schematic did help but I now have another question.......can the unit only mount one way at the top of the tank ? if not, should the bend in the float rod face to the lafet or right side of the tank (could be toward the front or back of the tank,too I guess. If I can find this out, I will feel confident about doing the install correctly and getting "Stella Baby" back on the road today or tomorrow. Mike Quote
Niel Hoback Posted April 17, 2010 Report Posted April 17, 2010 I believe it will only go in one way as the holes are not equally spaced. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.