Rear view mirror

[bkahler]

Ok, next question.

I pulled this mirror out of a B series dodge that was in a salvage yard. My truck doesn't have holes that would work for this type of mirror. I also have a mirror that bolts through the inside glass center trim strip. Is there a concensus as to which mirror might be correct?

Thanks,

Brad

[Steven Hood]

I would say the first, but that is purely a guess. Let me do some checking and see what I can find.

Steve

[Steven Hood]

I can find the part number for it, but not a picture. Anybody else got anything?

[52B3B108]

My truck came with the one hole drilled throught the divider piece. I have no reason to think it's anything but original.

[norrism1]

I had 3 51 b3b's and they all had the tapped hole in the center strip. None of the mirrors you show are the correct one. The one you need is about 6 inches long and 2 inches high with a 3 inch (+,-) long stud with a ball swivel out of the back that is held in place with a triangle plate that uses 3 screws to hold it down and it also adusts the tension on the ball joint to swivel. As for the outside mirror(s), it was mounted on the top door hinge with a longer pin.

[Vintrader]

These are on my 51 B3C, I have seen the same mirror on other B3 and B4 models. Not sure about B1 and B2. I have seen other Mirrors that mount more at the top above the center divider. Dutch

[bkahler]

Well it looks like I'm going to have to start looking for a review mirror

Fortunately I have two of the extendable type for use on the doors so all is not lost

Thanks for all the replys.

Brad

[Mario Loya B1B]

How about this mirror

[bkahler]

How about this mirror

Thanks Mario, I'll keep my eyes on it.

Brad