Don Jordan Posted August 9, 2009 Report Posted August 9, 2009 I was cleaning the rear bumper and noticed a little piece of chrome was chipped away. I just (months ago) had the bumper re chromed. Is this a usual occurrence? What a drag if I have to take it back. I wonder how anxious this guy is going to be to re chrome it. It's just a little piece but I have no idea how long it would take to just peel off. Quote
adam_knox Posted August 9, 2009 Report Posted August 9, 2009 I know absolutely zilch about the proper adhesion of chrome plating, but if its "chipping" off with little effort, I would definitely take it back since its been only a few months. If it was chipped off by accidentally scraping it with a flat head screw driver I would then just call about the best way to prevent flaking from the surrounding area. Good luck, hopefully it won't be a frustrating encounter with the gentleman who did the chroming. Quote
claybill Posted August 9, 2009 Report Posted August 9, 2009 if the plater doesnt buff and round off the sharp edges before plating, and another re-buff after nickel you can get a peeling off at any sharp edge...like on my bumpers!!!@##$%^&^* peeling up from the lower edge. bill Quote
Rodney Bullock Posted August 9, 2009 Report Posted August 9, 2009 Take it back as soon as possible. Tell him monday what happened. then take it back tuesday. Don't waste any time. Quote
claybill Posted August 10, 2009 Report Posted August 10, 2009 (edited) triple chrome plating is 3 layers of metal...steel (part)..copper...nickel...the the chrome. it is possible to plate with NO guarantees to skip a few processes.... the initial buffing is the most expensive...then additional buff (light) between plating metals for a super smooth adhering chrome!!! if you dont buff the sharp edges..trouble is just around the corner. what i uderstand is...chrome sticks to nickel...nickel sticks to copper...copper sticks to steel. with light plating coats you build up a strong base for a good color and shine. some folks stop at the nickel stage..looks very nice..durable too. this is not a technical explanation, just a casual one from taking tons of cycle stuff to the 'plater'. the plating company in dubuque iowa (AIH)is probably the best in the country, and no doubt the most expensive. each piece is guaranteed forever!!!! the craftsmanship is flawless. they do the impossible..and you pay for it! bill Edited August 10, 2009 by claybill missed a word Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.