br0k3N18 Posted August 4, 2009 Report Posted August 4, 2009 So I'm wanting to get a set of buckets out of a Ram (the ones with the seatbelt made into the seat) what would be the easiest way to go about doing this, my thought was to cut out the old seat frame and just go from there, another thought I had was to just fab something up and set them ontop/inside the current seat frame...whatcha guys think? Quote
grey beard Posted August 5, 2009 Report Posted August 5, 2009 I've seen two Pilothouse trucks where the owner just removed the seat frame from the tracks - only four bolts and the whole frame comes out. Then they used seat bases from a full sized van and adapted these to the cab floor and bolted the buckets to these. Raises the seat up nearly 8 inches for a better height. If you're careful, you can do this and not destroy the ability to put it back stock some day, if you change your mind. Quote
PatS.... Posted August 5, 2009 Report Posted August 5, 2009 Have a look at 88-98 Chevy/GMC seats. The floor is flat and the bases are just the right height. Some have seat belts built in as well. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.