bach4660 Posted December 20, 2006 Report Posted December 20, 2006 on my drivers door, after I close it and it latches, there is about 1/4" of travel that allows the door to rattle. How do you tighten this fit? If you push on the door from the outside it will travel inwards a 1/4", there is no rubber or seals on the door, but there is also none on the passenger side and it is tight. Does the latch move?, or do you do it at the hinges. Quote
Vintrader Posted December 20, 2006 Report Posted December 20, 2006 There is a striker plate about the middle of the door jamb on the cab that has 2 screws in it. If you loosen those that plate should move and make up for your 1/4" . Dutch Quote
MBF Posted December 20, 2006 Report Posted December 20, 2006 Make sure the rubber weatherstripping (mounted on the cab for the rear side of the door) is in place and pliable. The weather stripping pushed the door out against the striker plate. Mike Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.