Search the Community
Showing results for tags 'chrysler windsor'.
-
New topic: Water pump removal. Just had a broken valve spring fixed and car runs great.........Well, now that I've been running it, it now has now developed a leak at the water pump. It looks like the leak is coming from where the fan pulley attaches to the water pump. How difficult is it to remove/repair/reinstall the water pump? When I was just looking at the water pump housing, it seems like the cylinder head is in the way of removing a bolt to take off the water pump assembly--unless that is a bolt that is for the back plate of the water pump (maybe called 'cover plate'??? not sure if I am using the correct nomenclature). I wouldn't think that the head would be in the way for any bolts that hold on the water pump assembly. When reading the 1949-1950 Chrysler shop manual it didn't mention anything about the head being in the way. Here is exactly what the manual says for the REMOVAL AND INSTALLATION OF WATER PUMP: (1) Drain cooling system; (2) Remove fan belt and disconnect water pump hose; (3) Remove bolts holding water pump to engine block and lift out water pump and fan assembly. Is it really that easy? Am I just making is seem complicated? I am looking forward to some suggestions. Thanks Guys! On another note, where can I find the parts that I need for my car? I have been using Andy Bernbaum, but I've had difficulty with their customer service when they sent me the wrong part...its been over 3 weeks and still haven't received the correct part (I am not exaggerating) but they charged me immediately for the wrong part....
- 24 replies
-
- 1
-
- water pump
- cooling system
-
(and 4 more)
Tagged with:
-
I received my wiring harnesses for my 48 Windsor from Rhode Island Wire this week. Took the day off today to do the install. The engine harness went in very smoothly. Now it's time for the dash harness and after being crooked up under the dash I am at a loss. How do you remove the instrument cluster? I thought I could install the harness while everything was in place but I do not see that happening. I think if I could pull the cluster out just a little bit I should be able to do the removal/ install do the harness. Any help would be appreciated.