jholland
-
Posts
20 -
Joined
-
Last visited
Content Type
Links Directory
Profiles
Articles
Forums
Downloads
Store
Gallery
Blogs
Events
Everything posted by jholland
-
Thanks for the follow up. I will check the different ideas and links out. Jim
-
Didn't notice the difference. Will look closer. Thanks
-
Where are these available from?
-
Looking for fender, door and rear fender. The ones that I have all look similar to each other. I will do another search but didn't see anything recent on where to find some. Thanks Jim
-
Anyone know where I can find trim clips for 46 plymouth? I see some on ebay but are for 1950 and must be made of gold. Jim
-
Thanks for the info. It looks like they are correct for my car. I wonder if a Plymouth offered two different rear valance/gravel shields? The parts car does not have the indentations or raised areas on it. Maybe Deluxe vs. Special Deluxe?
-
When I purchaded the 46 Plymouth Business coupe I am working on, it came with two rear bumpers that looked the same. Now I am ready to start the body work on the rear valance and notice the ones I got with the car are different than the one on my parts car. The one on the parts car is flat. Here are photos of the ones I got with the car. Is this the correct valance? Also, does anyone know what the backet that was bolted to the valance/bumper would have been for? Jim
-
Cool. Not going to work in my business coupe but was a neat find. Your list shows it available up to 42. Ant idea if they were still in the list for the later 40's or people just kept putting them in the newer cars?
-
Looks just like the pair I have. Any idea if they are factory or after market? Do you still want pictures? I can take some if you need them?
-
I found a pair of under seat heater in 4 door parts car I bought last year. It is a 46-48 Plymouth. They are pretty cool. Not sure if they are factory or aftermarket. They fit into indentations that are part of the 4 door and my 46 business coupe.
-
Western Nebraska only got maybe 2" but man did the wind blow. 50 mile per hour plus. Good thing we didn't get the 8" they were calling for.
-
Thanks for the reply. I am pretty sure will have to get some from internet but feel better knowing someone has used the "newer" stuff on a 6 volt system.
-
Looking for some info on the difference between wire terminals I can get at the local parts store vs. from Rhode Island Wire or the other YNZ. I am ordering the wire to get the old look cloth cover but not sure I need to go to the trouble of ordering or just use parts store terminal.
-
Ok. Not sure if I will use them or not but will let you know if I don't need them. Long way to go till I need to worry about any type of heater.
-
Thanks for the info. I will keep looking for some more information on them. I thought they were pretty cool but had know idea they would be this hard to find anything about. I do think they were made for these cars since the motor bumpout on the bottom of the heaters fit into depressions in the floor pan of the 4 door and the same depressions are in the business coup I am working on. Not sure what I will do with them. Still got a long way to go before I worry about how many heaters to install.
-
What can you tell me about them? Were they just the heaters under the seat or were they matched with the heater under the dash (as in a set)? These came out of a 4 door parts car I bought that also has the other heater. Can't find anything on the internet. How hard to find are they? One of them cleaned up real nice and the metal looks good. The other housing will need some work (rust). Not sure how much work to put into it. Both of the heater cores hold pressuer and checked out fine at the radiator shop. Even more amazing the fan motors still run when you hook the up to battery.
-
Maybe I figured out how to upload pictures on my own...not very likely but maybe. Here goes.
-
Looks very similar to the ones I have. Looks like the heater under the dash is part of it too. Mine has a heater but have not looked very close at it yet. How do you upload photos from your computer? I have some photos of the heaters before and after (cleaned one up already).
-
no markings at all on either of them. I will get a photo of them and put it up tomorrow if I can. I cleaned the housing of one of them up already and had both checked out at radiator shop to be sure they held pressure. Not sure what to do with them but would like to know more. Thanks for the info.
-
Bought a 4 door parts car to help figure out how the heck to put the 46 business coupe back together that I bought in pieces. Found heaters under each side of the front seat of the parts car when I got all the dirt and mouse you know what out of the way. Anyone know anything about these? No markings on either of them but they fit into the depresions in the floor pan like they were made for the car. Were they dealer ad on?
