HCD

I was able to get a wd 40 straw into the lube pipe behind the speedo cluster a week ago and get more lubrication in there. Hopefu;;y if all it needed was more lubrication this may get it working again.

replacing the speedometer cable was a real pain to replace, especially at the transmission. I was hoping that would have fixed the problem, if adding more lube doesnt work, Im afraid the cluster will need replacing or rebuilt.

I have a 1948 Chrysler New Yorker that Ive changed the speedo cable and speedometer is still not working. have also lubed the port near cable to cluster. Before it wasnt working at all, now it pegs to 100 when moving. I have a good shop manual but it doesnt have any info regarding speedometer. Im pretty sure the cluster itself will have to be rebuilt or replaced. Anyone had similar problems? any input appreciated.

Im trying to bring back a 1948 Chrysler New Yorker with fluid drive, its a semi automatic M5. Most all electrical has been done Im looking for other Chrysler fluid drive owners in the Atlanta area who have dealt with type cars and transmissions. Thanks

Yes sir, heres a pic of my 48 Chryslers relay, with what appears to be an additional relay of some sort attached just above it. trying to figure out what it is and it was done by a previous owner this platform doesnt allow me to attach the picture could I ask you for your email so I can send you the picture. my email is dodsonhc@bellsouth.net

Thanks, is the wire on the right in pic just above the fuse the yellow wire going to carb? or the one on the left? owner before me added a newer aftermarket relay that is to the left of this pic of relay and it only has H, not TH. all my other wires are connected to trans components its just one to carb giving me a problem. thanks for photo

Thanks for the diagram I have a similar one. Really wanting a photo of someones Chrysler that is wired up amd working, esp carb to relay

does anyone have pics of their fluid drive 40s Chrysler showing wire from relay to carburetor?

thanks Donald, yes the relay blade should be listed as TH and I know which terminal on carb it connects to, but my relay isnt marked as TH and I need some pics of someone who has it connected in their Chrysler for reference

I have a 1948 Chrysler New Yorker with fluid drive and trying to run a wire from relay to carb kickdown terminal. Ive got service manual and diagrams does anyone have a similar chrysler with wire connected and have pics of what it looks like? The wiring diagram shows wire running from TH terminal to carb kickdown

Ive got my 48 Chrysler New Yorker L8 running great after some replaced electronics. And is driving in high gear fine. Someone had posted pics of the 2 wires running from relay to carb itself on this site but cant find it. I have the shop manual but it doesnt have clear wiring diagrams for relay to carb. Anyone out there have them? Thanks

A few years ago I helped a friend upgrade his 1960 Bugeye Sprite from points to Petronix. We had an awful time trying to adjust its points in such a cramped space. It was a positive ground as well. After installing the Petronix solid state ignition module it ran perfectly. Also kept the points and components just in case as a backup.

Autolite components are now so cheaply made in China or India, that I Dont trust the quality, or design anymore. If I can get a Solid State ignition to work well, with Petronix, I'll never go back to points again.

I've done Petronix upgrades to at least 3, 1960s cars and havent had any problems. Im hoping it wont be a problem in my 48 Chrysler. I've still got the old points in and car is running so will leave for now. Points are so cheaply made these days and have to be adjusted every change in seasons. Im a firm believer in solid state upgrades like Petronix, but will keep old points as a backup. Thanks for the replies.