.jpg.8cc590ec622f20bf697e135de3e22b99.jpg)
P4coupe
-
Posts
9 -
Joined
-
Last visited
Content Type
Links Directory
Profiles
Articles
Forums
Downloads
Store
Gallery
Blogs
Events
Everything posted by P4coupe
-
YES
-
Not that I know of, but you can try. But having the wiring schematic you are miles ahead of the game. Go to office depot and have it printed. several copies, large over 40 (AGE) print. multiple sheets if needed. Be sure you seal the joints where harnesses come together with self sealing tape. RI breaks it down into sections, So should you and make notes. Lots of notes.
-
I did RI for my 37cpe . To make life easier. Take the wiring Dia to Office Depot and have a copy printed up so you can read it 6 ft away. Size of print varies with age.
-
I assume you mean the metal covers. No I didn't. They clean right up when you take the weight off the springs and spray.
-
They were on my 37 cpe, that I got in Washington state in 1987. One leaf was broke and made more noise than a person has a need to bare. Took apart, had bad leaf replaced and had then re arched at spring place. Had springs punched at ends for a Teflon bushing. Very quiet and smooth riding. Glad I followed the spring rebuilding place advice.
-
Yes still have them. I will take some more photos on Sunday for you . Have both rear fenders. located Warrenton Va
-
You are right I need some help. I pulled out the fenders from a make do storage (Been there 8 years) and discovered that there are two front fender braces, the two rear fenders no rust through, the split seats with no upholstery, and the trunk lid, all from the same 38 coupe. The seat looks same width as 37 but has a gear adjustment, fender braces look the same as 37, but the trunk lid what will it fit? Thanks in advance Harold
-
Thank You for the help. I'm like a lot of other folks are cleaning out and organizing our collections. In the same group of parts were the two fender braces, The front seat with out covering and I don't remember it but the trunk lid. Probably the most sought part of the bunch. The fenders have surface rust, but no rust through. The trunk lid has a some minor rust through, but little compared to what I had to deal with on my 37 CPE. May I ask for your help one more time please. Thanks Harold
-
I have a pair of 38 plymouth rear fenders from a Cpe, I was told. What years/models will they fit? thanks in advance
.thumb.jpg.abea6bb97c14b01ae4c499a60cc4fb0d.jpg)