claybill Posted January 27, 2008 Report Posted January 27, 2008 i tried to get the king pin out...and short of a 120 lb hammer i couldnet get it to budge..(yes, .i took the side pin out.) cannot get the damn grease caps out..tried everything of course but one, and i dont know what that one is! the A arms are off and on my bench..lookin' at me..... the grease caps..heat?, i drilled and hammered.. bill Quote
58prostreet Posted January 27, 2008 Report Posted January 27, 2008 after I got the side pin out, I drilled a 5/16 hole in top grease cap and put a 1/4 in. punch in hole and hit it with 5 lb hammer and out it came. Good luck, Bob Quote
PatS.... Posted January 27, 2008 Report Posted January 27, 2008 I drilled the top one, then used an old big flathead screwdriver and wedged it out. Didn't bother with the bottom ones, they came out with the king pin which was driven out by a drft being hit by a very BFH. Quote
claybill Posted January 28, 2008 Author Report Posted January 28, 2008 thanks...warm weather today..BACK TO THE BENCH WITH A BFG. AS IN BIGGER. CLAYBILL Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.