50croyal Posted July 30 Report Share Posted July 30 Hey everyone, im having some issues with the starter solenoid on my 1950 chrysler royal. I had all the wiring hooked up and in the right place and relay coil worked just fine but the pull-in coil isn’t doing its job at engaging everything else. I’ve looked around at other forums and they said you could rewind the pull in coil, so thats what im trying to do but i cant pull the coil out because its crimped into the housing. So does anyone have any experience rebuilding the autolite solenoids with all 4 studs in the front that cant give me some tips? Or does anyone have a autolite solenoid that they would sell for a good price Quote Link to comment Share on other sites More sharing options...
The M Posted September 4 Report Share Posted September 4 (edited) Edited September 4 by The M Quote Link to comment Share on other sites More sharing options...
Solution The M Posted September 4 Solution Report Share Posted September 4 Hi! You need to drill a hole into the weld, just on one side. Then you can bend the housing slightly to move the inner coil. Keep in mind, though, that bending it back and rewelding can be quite difficult. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.