WANTED: 1948 Plymouth coupe drivers side mirror

[BeardBros]

I am looking for a drivers side mirror for a 1948 Plymouth 5 window coupe. The round mirror was broken off in the past. I still have the arm in very good condition on this car. So I am in need of the whole unit or another mirror to put on the existing arm. Any help would be appreciated. You can email me at Jim at beardbrothersinc . com or call me at 815- two five two - 7247

Thanks - Jim

[BobT-47P15]

It would be helpful if you could post a picture of the item in question.

Some mirrors can be repaired, but not sure that others can have the

head replaced. Is it the swan neck mirror that goes on the cowl

in place of the short piece of stainless trim? There are numerous

styles of round head mirrors out there.

[BeardBros]

It is the 1 piece cast swan neck mirror that I need, for the drivers side. The one I have has the mirror broken off. The rest of the arm is fine. I just cannot find a mirror to match the other side.

[BobT-47P15]

There are several swan neck style mirrors currently on ebay......don't know

if any of these would be helpful, but here's a link to that group.

http://www.ebay.com/sch/i.html?_from=R40&_trksid=p3984.m570.l1313&_nkw=swan+neck+mirror&_sacat=See-All-Categories

[Ed Griffin]

I am just curious but does the base mount of your mirror match the same width as the rest of your trim or is the width smaller? I purchased a set a few years back and the base width is a tad narrower than the stainless trim it's aligned with.