woodscavenger Posted November 6, 2008 Report Share Posted November 6, 2008 Here is the situation. The cab has been removed. I am adding a dual chamber MC under the floor boards reversing the direction of the current location. I created a bracket for the new cylinder which will be mounted to the frame. Before I mark and drill I need to figure out where the stock pedal location sits before you push it down. I never drove this truck before dismantling it so I don't have a good idea of where it sits. I think the easiest way to describe it would be to tell me what angle the pedal sits in relation to the floor board. Looking at it I would guess that the oval foot pedal is about perpendicular to the floor but I am not sure. Maybe another way to describe it would be the angle of the arm in relation to the pivot shaft. Quote Link to comment Share on other sites More sharing options...
Guest Kuster13 Posted November 6, 2008 Report Share Posted November 6, 2008 Would the height of the top of the pedal to, say the top of the frame help? Tom Quote Link to comment Share on other sites More sharing options...
51 Fargo Posted November 7, 2008 Report Share Posted November 7, 2008 Here is the set up I put in my truck and this is a universal set up Quote Link to comment Share on other sites More sharing options...
woodscavenger Posted November 7, 2008 Author Report Share Posted November 7, 2008 That is similar to what I created but I am using the stock pivot point next to the clutch pedal. I still don't know what where the "neutral" position is for the brake pedal before you stomp on it to stop. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.