jake_gogan

I never thought about a local parts store... I just figured they wouldn't even know what I was talking about...

anyone know of any places that rebuild voltage regulators... I have an autolite generator 12 volt. looking for a voltage regulator... can send mine out to be fixed or just buy a new one... any help would be amazing.. thanks jake

ok sweet I will look him up.... ever rebuild one... my uncle said it prob isn't much.... thanks for the start...

I have a 1953 fargo half ton pickup with the straight 6. recently the generator has stopped making a charge. it is a 12 volt shunt generator part number 1770754 it also has a autolite number of gjc-7012-a serial number of 9-1001851. it there a way to rebuild it or should I just try and find a new one.. also where would I find one... I have some pictures of the generator if that helps..

im sorry for the confusion i only meant to post two different pics of the correct way my wires went... which is the left picture i will take off the second picture to avoid confusion. plus that picture is posted in my first post...

put all the new stuff in and got some info from another memeber by email desoto1939@aol.com and now everything works... took it for a spin around the block and its got better pick up then before.... thanks for all the help... this picture is how everything is on mine distributer now that it works...

it is the 1at-4012 i cant rely verify that its a 1 or an A but it looks like an A and the one is unreadable. the ground wire that is going from the base plate to the condenser is the only item i can figure thats in the wrong place... just put new contact points condenser rotor and cap on today and still no luck with spark.. im gonna pull the top off the distributer and check power flow and see what i can figure out from here... new pic of the distributer after i put the new points and condenser in. electricsal taped any exposed wires that might effect anything... thanks for the advise guys

i have a 1953 fargo 1/2 ton pick up with the 218 straight six. i recently tried putting an ebay tune up kit in the distributer until i realised it was the wrong one.. so i put it back together and now i have no spark... i should of taken some pics before i started. the distributer is part number 1345464. i did buy new distributer tune up kit and it came with all new parts i just need some info on where the wires go.. i think i got a ground wire or power wire going to the wrong spot...