1949wayfarer

The car that I have did not have any door, belt line, rocker and rear fender moulding. It has never been drilled or has there ever been any moulding on it - it came from the factory with no moulding. I'm needing to know were to place the moulding (the fenders) so I can drill for it. The fender moulding that I recently purchased is not the exact shape of the fender, possibly bent when it was removed for a salvage car or from shipping as for the other reason I need to know were it is to be positioned.

Firstly thank you for replying, I was wondering what you had meant - by what you said... I'm looking for someone to measure their 49 Dodge rear fender for me and thought I should suggest the best way I knew. Silly me, you must have thought I was showing off!

I recently purchased a 1949 Dodge wayfarer, it was a factory base model - no trim and I'm wanting to correctly place the rear fender moulding. 
 If I was to measure its placement this is what I would do: Passenger side: 1. with piece of paper; place it level under the trim and have it touch the welt of the fender, mark the length for the left and right positions of the trim to the welt of the fender. 2. with a yard stick or a small wood trim strap, edge on the floor/ground and parallel with the fender at the trim edge and with a small adjustable set square, mark the bottom of the fender and bottom of the trim ends and note the distance between those marks.
 
 Thank you so much