Someone want to know what size bolts were needed to bolt a flat head to an HF engine stand. The stand I have, which is an HF one, will only fit the flat head in one configuration.
Top two bolts are the 5/16 ones and screw into the block. The bottom two bolts pass thru an existing hole on each side and are held with a nut. You will need washers under the heads of the bolts to keep them from passing thru the holes on the engine stand arms.
Someone want to know what size bolts were needed to bolt a flat head to an HF engine stand. The stand I have, which is an HF one, will only fit the flat head in one configuration.
Top two bolts are the 5/16 ones and screw into the block. The bottom two bolts pass thru an existing hole on each side and are held with a nut. You will need washers under the heads of the bolts to keep them from passing thru the holes on the engine stand arms.