Decided to check the cold valve clearances on my B3B as I have the manifold off and room to work.  I copied the following adjustment sequence from the "technical section".  Adjustment of #5 and #2 inlet valves are listed in both Stage A and B.   Thinking that:  #5 both valves should be #5 exhaust?  #2 both valves should be #2 exhaust?    Stage A, #1 and #6 at TDC, #1 in firing position Stage B, #1 and #6 at TDC, #6 in firing position To move from Stage A to B, manually turn the eng