Saskwatch Posted February 5, 2023 Report Share Posted February 5, 2023 Manual says to “Inspect the relief valve plunger and the spring” and if going to reuse to “polish” before reassembly. What would I use to polish up the plunger ? I can see where it has been moving back & forth but really no deep scratches can be detected when running your fingernail over them. Thank you in advance, ? Quote Link to comment Share on other sites More sharing options...
kencombs Posted February 5, 2023 Report Share Posted February 5, 2023 Lots of choices, I usually use 1000 or 1500 grit wet or dry for such things, just because I always have some handy. 2 1 Quote Link to comment Share on other sites More sharing options...
P15-D24 Posted February 6, 2023 Report Share Posted February 6, 2023 Crocus cloth 1 Quote Link to comment Share on other sites More sharing options...
MarcDeSoto Posted February 6, 2023 Report Share Posted February 6, 2023 Maybe some steel wool? 1 Quote Link to comment Share on other sites More sharing options...
Conn47D24 Posted February 7, 2023 Report Share Posted February 7, 2023 Soak the crud off, then a fine fine wool 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.