Knowinghades63 Posted February 2, 2023 Report Share Posted February 2, 2023 after doing a bunch of looking around for a kit to rebuild my front end on my 51 cranbrook i decided to get the kanter complete rebuild kit. Im getting ready to put it in by reviewing my maintence manual as well but i was just wondering if anyone had any specific advice to keep in mind. Heres the contents of my kit. 1 KPK 64 MOPAR 1939-54 SMALL CHASSIS2 PK 10072 PIN KIT, UPPER OUTER 2 PK 10045 PIN KIT, LOWER OUTER 1 TRE 131L OUTER TIE ROD END 1 TRE 60R OUTER TIE ROD END 2 SK 13018A SHAFT KIT, UPPER INNER 2 SK 13014A SHAFT KIT, LOWER INNER Thanks in advance for any help guys. Im excited to get this started because its really one of the last things i have to do before she is road worthy. Quote Link to comment Share on other sites More sharing options...
andyd Posted February 2, 2023 Report Share Posted February 2, 2023 I could be wrong but shouldn't you also be getting the king pin bushes, bearings & shims as well as inner tie rod ends......I'd also be checking the sway bar bushes and links(if applicable) and upper & lower rebound rubbers and finally shock absorbers.........but........more importantly......Welcome Aboard from Oztralia........andyd Quote Link to comment Share on other sites More sharing options...
Knowinghades63 Posted February 5, 2023 Author Report Share Posted February 5, 2023 Thanks I know it’s hard to tell but the kit does come with king pin sets. I will for sure give the other things a thorough check. Thanks for the help. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.