MarcDeSoto Posted November 24, 2022 Report Share Posted November 24, 2022 I just put my Sisson auto choke on my exhaust manifold. I have the clip holding the rod on the Sisson device, but I need the clip that holds the rod onto the carburetor. I measured the size of the rod, and it is a number 8. what size clip shoud I buy? There are clips on Ebay, but none say they are for a no. 8 rod. Do they go by fraction? Quote Link to comment Share on other sites More sharing options...
Doug&Deb Posted November 24, 2022 Report Share Posted November 24, 2022 Generic carb linkage clips are what I used. Take the link to your local parts store. Be mindful that there are left and right clips. 1 Quote Link to comment Share on other sites More sharing options...
LeRoy Posted November 24, 2022 Report Share Posted November 24, 2022 I needed a few and bought a Dorman 41017 set for about 10 bucks. It has 2 or 3 sizes, the one I needed was included. 1 Quote Link to comment Share on other sites More sharing options...
Sniper Posted November 24, 2022 Report Share Posted November 24, 2022 I have too imagine finding carb parts on the shelf these days is getting rare. Not that I have looked recently. 1 1 Quote Link to comment Share on other sites More sharing options...
MarcDeSoto Posted November 26, 2022 Author Report Share Posted November 26, 2022 (edited) I ordered some carb linkage clips from NAPA like LeRoy and the smallest size did fit. There is a left and right clip. You can't turn the left clip around to make a right clip. So it fit my no. 8 rod that comes out of the Sisson Auto choke. Edited November 26, 2022 by MarcDeSoto 1 Quote Link to comment Share on other sites More sharing options...
Doug&Deb Posted November 26, 2022 Report Share Posted November 26, 2022 It may restrict movement. They’re meant to fit one way. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.