Jump to content

Hot, cold or running?


Bob Riding

Recommended Posts

I am doing an engine swap between my '56 with the Power Pack option (230cu in with 2bbl carb, 132hp) and my current powerplant in the wagon, a 218 with 2-1bbls and split exhaust. The 230 is running and still in the car. I want to do a valve adjust before I pull it.  Keith's videos show him doing the adjust while the engine is running.

Flat Head Chrysler Valve Clearance Check

The Tech Tips suggest bringing it up to operating temp and then shut it off and do it hot. Others say cold with different tolerances. Thoughts?

IMG_0030.jpeg

IMG_3587.jpeg

Link to comment
Share on other sites

When I rebuilt my engine I set the valves while on the engine stand at .012 in and ex., after installing and running to operating temp., I rechecked with engine running, two needed to be loosened up slightly for proper clearance of .010".

  • Like 1
Link to comment
Share on other sites

I did check them while hot and running. You can feel the right tug of the feeler gauge. I'd shut off the engine and to make an adjustment. Then fire it up again and test the gap while running. It was an interesting experiment. However, I also have achieved great results when setting them cold and adding .002" to the spec.

 

If you do want to set them hot keep in mind hot coolant temp does not mean the oil and block are hot. It takes quite a while to get the oil hot, the block fully warmed up. Take off the inner fender access panels and go for a drive. If you can drive up some hills it will heat up quicker. Flat driving, it'd estimate 20 mins of run time to get everything up to temp.

Edited by keithb7
  • Like 4
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Terms of Use