OUTFXD Posted July 20, 2022 Report Share Posted July 20, 2022 Pulled the oil pan off Jacquiline. The rear gasket is about 30% missing. Not leaking, Not Ragged. GONE. Got a new oil pan gasket. In the kit there where a pair of 3" o rings and the following instructions. "Use the O-ring supplied to fabricate new front main cap seals Cut 2 sections of the o-ring approximately 1.125 inches in length and lay in the cap groove." some one with experience educate me. are the end cap seals I am fabricating really only an inch long? I am assuming the cap groove is on the cap and not part of the oil pan. anyone have pictures? Quote Link to comment Share on other sites More sharing options...
DJK Posted July 20, 2022 Report Share Posted July 20, 2022 1 Quote Link to comment Share on other sites More sharing options...
Sniper Posted July 20, 2022 Report Share Posted July 20, 2022 40 minutes ago, DJK said: No worky Quote Link to comment Share on other sites More sharing options...
DJK Posted July 24, 2022 Report Share Posted July 24, 2022 Sorry, just realized I misread your request. Here is a picture of the rubber seals on the front retainer. 1 Quote Link to comment Share on other sites More sharing options...
joecoozie Posted July 24, 2022 Report Share Posted July 24, 2022 On 7/20/2022 at 9:08 AM, Sniper said: No worky Your pictures are not working 1 Quote Link to comment Share on other sites More sharing options...
DJK Posted July 26, 2022 Report Share Posted July 26, 2022 Working on my end, not sure what to do. 1 Quote Link to comment Share on other sites More sharing options...
Sniper Posted July 26, 2022 Report Share Posted July 26, 2022 That's because it is a link to something on your computer, which is why it works for you and not anyone else. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.