Jump to content

Recommended Posts

Posted (edited)

There is only a couple weekends left for me up here in Canada. Insurance runs out soon.  Today was a good day here. I found nice quiet spot for a photo. 
 

If you got out recently, let’s see some pics. Fall foliage with your Mopar would be a real treat! None to be seen during my trip to the clay sand banks here. 
 

 

 

1B20D411-812E-4DEE-B1EC-4D1C378B6F32.jpeg

Edited by keithb7
  • Like 5
Posted (edited)

We have been having fabulous fall weather in southern Alberta! Recent pics within the last week or two. 
 

I’m getting an old car out every day while I can. I know what’s eventually coming. 
 

2C331215-CF2E-4B87-8A43-A32A45DC202B.jpeg.0f1f3cb088f51de6f5637521724cf25d.jpeg

 

3488B647-5A1F-46DF-A8C7-EEBBD8F3E950.jpeg.ecd18572fb6c27f5680f51d44606ef72.jpeg
 

6D63FA95-128D-4B6D-9015-0F80BEE9119D.jpeg.bcb69ed08d0d3a101ea69131ff1493af.jpeg

 

Edited by RobertKB
  • Like 3
Posted

Fall colors are not a thing where I am. And, for that matter, what passes for winter her probably wouldn’t be considered winter by many either. That said, I probably should have gotten the car out today but didn’t.

Posted

Yesterday took my 1952 Belvedere for a drive...last one for the year..

20211016_163631_compress2.jpg

  • Like 5
Posted

IMG_20211010_115530.jpg

 

IMG_20211010_115028.jpg

 

IMG_20211010_135328.jpg

 

Last weekend we did a day trip with the MN plymouth club. Went down the WI side of the river and then came back home on the MN side. 

I did drive my P15 today after reinstalling my driveshaft with new boots. Tomorrow I can check if my 2nd try at sealing the overdrive worked!

 

 

 

 

  • Like 2
Posted
7 minutes ago, Plymouthy Adams said:

I cruised through a couple repair procedures on a vehicle,  does that count?

 

 

I think it might have counted. However you disqualified by not posting any pics. 
 

?

  • Haha 1
Posted

@Young Edwhat car are we looking at here?  Is it missing stock running boards? What year did they drop them off the Mopar line up?

 

 

 

 

A3B734DF-CAF1-4443-B79A-7153A2F9719A.jpeg

Posted
5 minutes ago, keithb7 said:

I think it might have counted. However you disqualified by not posting any pics. 
 

?

 

 

let's rectify that shall we....procedure, to phase the drive line after installing a larger engine and a 5 speed tranny and upgrading to a 3.9 rear axle eliminating the stock 4.55 gears.  Procedure number 2, I then changed the pinion seal, flange surface was smooth with no cut one could detect with a fingernail....so hopefully that is a done deal also.  

 

 

IMG_4427.JPG

IMG_4428.JPG

  • Like 2
Posted

As a side note, if anyone here ever needs to correct phasing with use of shims....I highly recommend these...they are extremely well made..a couple dollars over some of the average ones you see but I don't really relate cast aluminum and open end slots average or close to par.

 

Axle Shims, 4 degree, 1.75" wide, steel wedge, caster pinion angle WFO 4.0-1.75 | eBay

Posted
31 minutes ago, Plymouthy Adams said:

 

 

let's rectify that shall we....procedure, to phase the drive line after installing a larger engine and a 5 speed tranny and upgrading to a 3.9 rear axle eliminating the stock 4.55 gears.  Procedure number 2, I then changed the pinion seal, flange surface was smooth with no cut one could detect with a fingernail....so hopefully that is a done deal also.  

 

 

IMG_4427.JPG

IMG_4428.JPG

Do I see those wonderful greaseable E-Brake cables?

Posted

Cheating a bit because the photo is from earlier, but I drove the Chrysler to lunch yesterday and to church today. From here on out, weather permitting, I plan on driving it somewhere once a week if possible.

Hebron4.jpg

  • Like 2
Posted

We have been in Maine since early June. Was bit by a tick and have been battling Lyme infection all summer. Still a lot of fatigue and very weak legs, just starting to walk again. 
      Maine is beautiful, I love the woods, water ways, cool weather and clean air. We return to California October 28.

      Here are some recent cruising photos of cars along the way.

A5BFA992-875E-4D6F-A481-D40E253921D7.jpeg

B9A128BE-2258-4531-8AF9-BD3B5F7855D8.jpeg

C769F0B5-36C4-4AD7-AAD0-CA120D0B64FA.jpeg

E11F4603-6035-4BB0-992D-EFBAC41E65AA.jpeg

  • Like 1
Posted (edited)

You're lucky Keith.  My body is still off of the frame, but I'm glad I took the body off!  Don't like doing major work on my back!  

 

 

Edited by MarcDeSoto
Posted

yep.....ant and the grasshopper story repeats itself.....but then, the all work and no play may be applicable also.....goal today, have the other lift ready to mounts the lights, 3/4 way done with that at this minute....you folks enjoy the scenery...I live in an area where the transition is so blah blah blah it is not readily noticeable...pecans go from green to brown and usually under the cover of darkness as they go from green one day to brown and on the ground the next.  My fall is marked with mulching leaves...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Terms of Use