Jump to content

How to replace a master cylinder on a 1948 S11 Desoto


Recommended Posts

From the manual

    12. REMOVAL OF MASTER CYLINDER.
- Disconnect the brake line
tubes at the master cylinder. Disconnect
brake pedal from master cylinder. Remove
the bolts which attach master cylinder to
chassis and lift out the master cylinder assembly.

Link to post
Share on other sites
  • 2 months later...

Someone has already told you how to remove the master cylinder, one thing people don't always do is bench bleed the cylinder before installing to remove the air.

Secure it in a bench vise run lines from the port to the reservoir and fill with fluid, start pumping the pedal until the air is out. When you go to bleeding the brakes start at the farthest cylinder from the master cylinder. I would suggest using Dot 3 brake fluid.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Terms of Use