Cudan Posted March 20, 2021 Report Share Posted March 20, 2021 Hi, I am working on the clutch and have a Q Is the fork in the first pic incorrectly mounted to the release bearing, I found this pic on the net. When i see the manual the fork is hold in place under the clip ? See second pic. I assume that is the correct way to install the fork. Quote Link to comment Share on other sites More sharing options...
Plymouthy Adams Posted March 20, 2021 Report Share Posted March 20, 2021 no...springs lock into the cups back side of the fork... Quote Link to comment Share on other sites More sharing options...
Cudan Posted March 20, 2021 Author Report Share Posted March 20, 2021 This way, see red arrow, the fork under the spring. Quote Link to comment Share on other sites More sharing options...
Sniper Posted March 20, 2021 Report Share Posted March 20, 2021 (edited) That is not the fork, those are the ears on the throwout bearing retainer. The clips need to be on the clutch fork, basically rotate it 90 degrees CCW. Edited March 20, 2021 by Sniper pic attached 1 1 Quote Link to comment Share on other sites More sharing options...
Cudan Posted March 20, 2021 Author Report Share Posted March 20, 2021 Thanks for the clear pic, that is what I ment with my red arrow in the pic. know I know how to install the parts. thanks Dan 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.