Bigscooter Posted February 1, 2021 Report Share Posted February 1, 2021 Hey guys, I have recently stumbled across a complete front chassis clip from what looks like a 50s Plymouth. It appears that someone was upgrading their front suspension and then decided to go a different direction and cut the whole clip off. my question is do you recognize this front Disk kit? I'm hoping to put it on my '52 Plymouth suburban. I think I can pick it up pretty reasonably Quote Link to comment Share on other sites More sharing options...
Plymouthy Adams Posted February 1, 2021 Report Share Posted February 1, 2021 is that an alloy hub...if so, odds are it may be Scarebird.....flash that name back to the owner and see if it joggles his memory. Quote Link to comment Share on other sites More sharing options...
Bigscooter Posted February 1, 2021 Author Report Share Posted February 1, 2021 2 minutes ago, Plymouthy Adams said: is that an alloy hub...if so, odds are it may be Scarebird.....flash that name back to the owner and see if it joggles his memory. It used to belong to his late uncle. He really knows nothing about it Quote Link to comment Share on other sites More sharing options...
Plymouthy Adams Posted February 1, 2021 Report Share Posted February 1, 2021 got you, question still remains...is it alloy, surely he can answer that question..... Quote Link to comment Share on other sites More sharing options...
Bigscooter Posted February 1, 2021 Author Report Share Posted February 1, 2021 This is zoomed in on the same shot Quote Link to comment Share on other sites More sharing options...
Hamilton Posted February 1, 2021 Report Share Posted February 1, 2021 If it's a Scarebird their name will be stamped on the adapter plate that's bolted to the hub. _ 1 Quote Link to comment Share on other sites More sharing options...
Adam H P15 D30 Posted February 1, 2021 Report Share Posted February 1, 2021 I hope that rotor is just sitting on the spindle part way and not installed fully.... 1 Quote Link to comment Share on other sites More sharing options...
DJ194950 Posted February 1, 2021 Report Share Posted February 1, 2021 I believe that the ECI also uses a aluminum hub in their kits ?? Many of their products do. Just a possibility. DJ 1 Quote Link to comment Share on other sites More sharing options...
belvedere666 Posted February 2, 2021 Report Share Posted February 2, 2021 18 hours ago, DJ194950 said: I believe that the ECI also uses a aluminum hub in their kits ?? Many of their products do. Just a possibility. DJ Looks a lot like my ECI kit. The calipers are huge. it should fit the OP’s car but they won’t be able to use stock wheels because of that caliper size. Quote Link to comment Share on other sites More sharing options...
allbizz49 Posted February 2, 2021 Report Share Posted February 2, 2021 Not sure about the brakes but the shock relocation is nice. Similar to what I am doing. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.