p24-1953 Posted November 20, 2020 Report Share Posted November 20, 2020 Does anyone know the size of the fender script clip or is it a speed nut? Quote Link to comment Share on other sites More sharing options...
Plymouthy Adams Posted November 20, 2020 Report Share Posted November 20, 2020 while they look similar..the speed nut is based on the two flat slightly on different planes...the clip is on the same plane with the two flaps...both are easily located by size of the pin they are going on at most any hardware store. Quote Link to comment Share on other sites More sharing options...
DJ194950 Posted November 21, 2020 Report Share Posted November 21, 2020 (edited) I would only use the push on type of retainer not speed nuts as most of these years used pot metal to make the name badges and the retainer pins easily break. Also they often are held on by the push in the hole type of a spring clip that goes in the hole from outside and the badge pins just gets pushed into the hole in the retainer. The hole in the sheet metal for placement also needs to be larger than the pin on the badge for this type. I bought a bag of 4-5 various sizes off EBay years ago and was not to expensive. I believe the seller is in Florida and regularly advertised all type of clips, etc. there. DJ Edited November 21, 2020 by DJ194950 add info Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.