Artillery Rims for my WC 10 1/2ton

[Life is Good]

Does anyone know where i can get a set of 16x6 or 16x5 artillary rims for my WC10 truck ? Bolt pattern is 4.5in x 5 lug. Also curios how to determin the need for spacers to move the rim out for tge best original look. Is there a standard measurment amount thst the wheeks are to be within the edge ofbthe fender outter wall  ? 

Thanks 

[Dan Hiebert]

Original or new?  Most tire/wheel shops that sell new original style wheels should have them if you're looking for new.  Coker Tire dose, but unknown if in the size you're looking for.  

[greg g]

Like this?  Found on web, may be wheelvintiques.  The back space is the critical measurements.  I believe stock was 3 1/2 measures from a straight edge across the inside rim to the hub flange.  Not much leeway before tires rub on rear springs and steering arms up front.  Trucks might be different but this is what I found.  I got a set of smoothies 15 inch with 5.5 rim width and 4 inch backspace.  They have been fine with 75 series radials.  Gotta use baby moons as there are no clips to retain stock caps.