Pooshoe Posted December 1, 2020 Author Report Share Posted December 1, 2020 This is the spacers I made . Not perfect but good enough for the girls I go with! Quote Link to comment Share on other sites More sharing options...
Pooshoe Posted December 1, 2020 Author Report Share Posted December 1, 2020 On 11/16/2020 at 6:10 PM, Frank Elder said: Will it require a longer shock? im trying to lower it so... Quote Link to comment Share on other sites More sharing options...
Dodgeb4ya Posted December 1, 2020 Report Share Posted December 1, 2020 (edited) I put 52 chrysler windsor lower arms/springs in my 51 plymouth when I was 16 to make it sit higher. The chrysler springs were too long to fit on the plymouth top seat so I then installed the chrysler lower seat A-arms...car sat couple inches higher with the stiffer chrysler springs. That was over 50 years ago. Edited December 1, 2020 by Dodgeb4ya Quote Link to comment Share on other sites More sharing options...
Frank Elder Posted December 1, 2020 Report Share Posted December 1, 2020 2 hours ago, Pooshoe said: im trying to lower it so... soooo yes or no? Quote Link to comment Share on other sites More sharing options...
Pooshoe Posted December 1, 2020 Author Report Share Posted December 1, 2020 No I will not be adding a taller spring Quote Link to comment Share on other sites More sharing options...
Frank Elder Posted December 1, 2020 Report Share Posted December 1, 2020 I was wondering if your shock was going to bottom out, but I guess not if your spring isn't going to compress as much anymore. Quote Link to comment Share on other sites More sharing options...
Sniper Posted December 1, 2020 Report Share Posted December 1, 2020 The bump stops are what limit the control arm movement, unless he changed the size of those the shock won't bottom out. All he's doing is changing the angle of the control arms to lower the body, which probably means he'll be bottoming out more. Quote Link to comment Share on other sites More sharing options...
Pooshoe Posted December 2, 2020 Author Report Share Posted December 2, 2020 10 hours ago, Sniper said: The bump stops are what limit the control arm movement, unless he changed the size of those the shock won't bottom out. All he's doing is changing the angle of the control arms to lower the body, which probably means he'll be bottoming out more. just like prom night! 1 Quote Link to comment Share on other sites More sharing options...
Booger Posted December 2, 2020 Report Share Posted December 2, 2020 first of all you cant weld that garbage. and a good bolt up is more secure Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.