LrudyD Posted September 23, 2020 Report Share Posted September 23, 2020 (edited) Hi all, I just located a ‘48 engine, trans, and radiator for my ‘48 Windsor. It’s coming from a ‘48 New Yorker. I understand the NY had a straight 8 with a 3 speed tranny. Question: Will this work for my Windsor? Would I have to do modifications for the larger engine, or will it fit nicely in the Windsor’s engine compartment? Also, will the radiator work as a swap? Thanks a bunch! Edited September 23, 2020 by LrudyD Remove pic Quote Link to comment Share on other sites More sharing options...
Plymouthy Adams Posted September 23, 2020 Report Share Posted September 23, 2020 got a tape measure ? 1 Quote Link to comment Share on other sites More sharing options...
knuckleharley Posted September 23, 2020 Report Share Posted September 23, 2020 Can't give you any advise at all on that swap,but I will ask you to give us some photos and details of the swap if you do the deal? And,PLEASE,put your old engine and trans up for sale here and other places instead of selling it for scrap. There is somebody,somewhere that needs a core to rebuild. 1 Quote Link to comment Share on other sites More sharing options...
RobertKB Posted September 23, 2020 Report Share Posted September 23, 2020 My guess is that things are a bit different. Also, if the 8 needs parts they are much harder to come by than parts for the 6 cylinder engines. 1 Quote Link to comment Share on other sites More sharing options...
Doug&Deb Posted September 23, 2020 Report Share Posted September 23, 2020 My guess is not easily. The New Yorker is longer to accommodate the 8. A tape measure would tell the tale. Quote Link to comment Share on other sites More sharing options...
Dodgeb4ya Posted September 23, 2020 Report Share Posted September 23, 2020 (edited) The front of the Windsor frame is shorter than the NewYorker frame by over 6-8". Meaning you cannot stuff that longer eight in your Windsor six cylinder chassis. The unique shaped eight radiator is huge compared to your Windsor rad. The NewYorker front radiator support and surrounding sheet metal is also completely different so that too won't swap. None of the suspension parts, wheels, driveline or rear end are the same as a six car either. None will interchange. On a good note the transmission will. Eight cylinder Chryslers have the big heavy chassis. That straight eight has three valuable parts....IF....in real good condition.. The radiator, starter and exhaust manifold. That New Yorker also has dual heaters with the very hard to find delicate heater control valve at the back of the head. Don't break it. Edited September 23, 2020 by Dodgeb4ya 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.