pflaming Posted July 31, 2020 Report Share Posted July 31, 2020 I have come across a car 218 with R10 overdrive. My truck needs an engine, so I want to put this in there. I think all I need is to add the cross member tor the rear engine mounts. Is that correct? Quote Link to comment Share on other sites More sharing options...
Merle Coggins Posted July 31, 2020 Report Share Posted July 31, 2020 What are you going to do with the clutch and brake pedals? 1 Quote Link to comment Share on other sites More sharing options...
DJ194950 Posted July 31, 2020 Report Share Posted July 31, 2020 14 minutes ago, Merle Coggins said: What are you going to do with the clutch and brake pedals? Cut, weld, drill, fab? Can be done? You go Paul! Where the heck do you keep finding R-10 OD trans? Is it a R-10 G-1 Mopar OD? 230 C.I or 218 C.I Mopar flathead? Running strong? After the dune buggy paint job? Still waiting on the completed pictures at Pismo Beach, Ca.! DJ Quote Link to comment Share on other sites More sharing options...
kencombs Posted July 31, 2020 Report Share Posted July 31, 2020 48 minutes ago, pflaming said: I have come across a car 218 with R10 overdrive. My truck needs an engine, so I want to put this in there. I think all I need is to add the cross member tor the rear engine mounts. Is that correct? I think that transmission will bolt to your PU clutch housing. If it is not a direct bolt-on, drilling and tapping would be much preferable (at least to me) to trying to put a modified crossmember in, then work out something for the clutch and brake. So swap your housing to the replacement engine and install the transmission. No frame or pedal work. Probably will need a different drive shaft, but it's possible that the OD may be the same length as the original PU trans. Quote Link to comment Share on other sites More sharing options...
pflaming Posted August 1, 2020 Author Report Share Posted August 1, 2020 (edited) You point out too many probables. Too old to do them, so will not make the swap. That leaves me with a nice engine and R10 overdrive to do something with. I’m in a serious downsizing program. Will ship the truck to my daughter in Indiana, then sell everything by spring. I plan to have an empty shop by spring. Edited August 1, 2020 by pflaming Quote Link to comment Share on other sites More sharing options...
pflaming Posted August 1, 2020 Author Report Share Posted August 1, 2020 3 hours ago, DJ194950 said: Where the heck do you keep finding R-10 OD trans? Is it a R-10 G-1 Mopar OD? 230 C.I or 218 C.I Mopar flathead? Running strong yes, R-10 G -1 MOPAR OD. Where do I find them, sorry, that is off limits! LOL, there has been no pattern for finding them, but they are out there. 218 C.I. MOPAR flathead. I now have two of them Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.