tollertdi Posted July 6, 2020 Report Share Posted July 6, 2020 My '48 has been in the family since new. I have what I believe to be the original factory exhaust, but the tail pipe is rusted out on the end and missing I would guess about 10 inches of pipe. Did the original tail pipe come straight out the back? Or did it curve down? Or go off to the right side? Quote Link to comment Share on other sites More sharing options...
John Reddie Posted July 6, 2020 Report Share Posted July 6, 2020 Hello, As I recall, the P15 original tailpipes turned off to the right (passenger side) under the rear bumper. An exhaust fabrication shop in your area could produce a new pipe pretty easily, some even have patterns of the original pipes. Good luck. John R Quote Link to comment Share on other sites More sharing options...
greg g Posted July 6, 2020 Report Share Posted July 6, 2020 Quote Link to comment Share on other sites More sharing options...
nc plumber Posted July 13, 2020 Report Share Posted July 13, 2020 Correct, the tailpipe needs to turn to the right as it passes under the bumper. Quote Link to comment Share on other sites More sharing options...
JohnS48plm Posted July 13, 2020 Report Share Posted July 13, 2020 Waldron exhaust in southern Michigan makes pipes to the original patterns. I put their exhausts on both my 48 convertible and 48 coupe. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.