Jump to content

Power Wagon purchase advice


JSabah

Recommended Posts

I’m looking at purchasing 2 (possible 3) power wagons that are in pretty rough shape. There are two 1952-54 and one 1950-51. I just finished a ‘49 Plymouth Woody so I’m somewhat familiar with the era but not so much with the power wagons. The frames look solid, some of the cab walls have rust. There are no bed sides, back or tailgate and the wood beds are present but rotting. Two have the original winches and most of the badging is there. Two ran when parked 10 yrs ago. I can typically weld Sheetmetal, make the wood beds, handle all the electrical, brakes, and fuel system. I typically send the engine, trans and gauges out to specialists. What pitfalls should I look out for (for instance on the woody, nobody makes wood kits so it was up to me and the fuel tank was not used in any other model, nor available). I have no experience (but always like to learn) about the transfer case or aux power - who works on or can just go thru and recondition those?  I expect to have period correct show cars (not concourse but very nice drivers)  Below is a picture of them as they stand now and my 49 just so you can see what I’ll expect. Looking forward to hearing what to look out for (also what values you think they may have as-is). D0BFC9D9-8862-4D0A-8C8D-B7F7C58744D3.jpeg.c89bb10e608d58e456f796f929be1df7.jpeg


7E506695-48C6-466D-AD42-ED67D9A7C1BE.jpeg.adaf4e6962326090b69e74d717b53550.jpeg

 

0C51EB9E-122F-47F5-A30F-49B9406BDF85.jpeg.7859d814f2cdf62940a8ebd129b808ad.jpeg

 

3464C2CC-9B9F-44C3-BC0A-FDD2BDF0E09E.jpeg.e98e28f00ca487604552abb87deedb6e.jpeg
 

F9DBCF46-6C89-4BE1-87BE-EC0A66B011EB.jpeg.5b745d6bc47bd892d1449a9920b779ee.jpeg
 

1A9B028F-2DB7-436F-B90A-BB4F13925591.jpeg.d1e65b22853496777ed1031e0e3769ef.jpeg

 

7E6CB256-A2ED-45E8-9263-E63364F962F7.jpeg.cdd6688443fb980711f7bd4102915072.jpeg
 

58F7C7DF-6E07-4EDC-8070-C854643A715F.jpeg.c5e6e873644375a1ed0c493bd9b2f981.jpeg

 

46998B9A-0AD5-4E60-A32A-BCA030EDFAAE.jpeg.ba004331a5487845d532d7f37a10e0e0.jpeg

5587DEBF-D8D3-4193-A18C-CB63299C5842.jpeg

709B9766-0617-4E69-8333-CA553EC59970.jpeg

Link to comment
Share on other sites

First off, I'm SOOOO jealous you have the means and opportunity to get some PW trucks!  They are so cool.  

 

Second, a truck isn't much different than a car, so same things: door bottoms, floor pans, "rocker" panel areas, all the typical rust spots.  The thing you have going for you is there are (now) a lot of parts being repopped as the PW is so popular.  You can get complete bed parts from several vendors.  I'd suggest talking to the guys down (to me) at Vintage Power Wagons and possibly Midwest Military for parts and advice specific to these trucks. 

 

Look like awesome projects to me!

Link to comment
Share on other sites

That is a great find. As mark said so jealous! All 3 of those look like savable projects. As for what to look for the biggest thing is the windshield frame. They are reproduced now but $1000 each. So if they are rotten be aware of the expense. 

Edited by Young Ed
Link to comment
Share on other sites

Well, I’m officially the proud owner of 3 projects..... or 3 1952 Power Wagons. Since I know nothing about the PW specifically, you can be sure I’ll be seeking advice from the forum often as soon as I start these ... which won’t be immediately as I have another (car) project to finish and had to promise the wife some work around the house will get done first .... just another collateral cost 

  • Like 2
  • Thanks 1
Link to comment
Share on other sites

one of only three vehicles I have ever regret letting go...my Austin America....my 41 Dodge truck (PW rendition) and my Porsche....I got my Porsche back after 28 years gone...story in itself, now got 3 Austins and a sister MG body style ADO16 and the truck has never been replaced...here it sits....big block and 4 on the floor..4WD and Porsche instruments in the dash..plate for removable winch on the front bumper....(they like, go missing otherwise)

 

 

41 BIG UGLY ft. profile.jpg

Edited by Plymouthy Adams
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Terms of Use