MarkAubuchon Posted March 17, 2020 Report Share Posted March 17, 2020 I know its been covered before. I want to upgade my 47 to 12 volts. What type of alternator, brackets and voltage regulator will I need. PS, its already 12 volt generator. Mark Quote Link to comment Share on other sites More sharing options...
Bob Riding Posted March 17, 2020 Report Share Posted March 17, 2020 11 minutes ago, MarkAubuchon said: I know its been covered before. I want to upgade my 47 to 12 volts. What type of alternator, brackets and voltage regulator will I need. PS, its already 12 volt generator. Mark Me too, however I will need to go all the way to a 12 volt alternator setup. I'm assuming any of the various mass market suppliers such as Summit, JEGS, etc.would be a good choice... Quote Link to comment Share on other sites More sharing options...
Sam Buchanan Posted March 17, 2020 Report Share Posted March 17, 2020 (edited) Get a one-wire alternator and you won't need a regulator. Here is where I got mine: https://www.ebay.com/str/howardent This vendor also has a bracket: https://www.ebay.com/str/howardent/Universal-Alternator-Bracket/_i.html?_storecat=7040873016 Make sure you order an alternator with the correct pulley width to fit your application. Edited March 17, 2020 by Sam Buchanan Quote Link to comment Share on other sites More sharing options...
MarkAubuchon Posted March 17, 2020 Author Report Share Posted March 17, 2020 Thanks this is perfect You guys ROCK! I guess that's ok for a 60 plus old guy to say. 1 Quote Link to comment Share on other sites More sharing options...
Sniper Posted March 17, 2020 Report Share Posted March 17, 2020 Here's what I did. http://www.im-creator.com/free/yourolddad/the-snipers-nest/12-volt-conversion Quote Link to comment Share on other sites More sharing options...
Bob Riding Posted March 18, 2020 Report Share Posted March 18, 2020 18 hours ago, Sniper said: Here's what I did. http://www.im-creator.com/free/yourolddad/the-snipers-nest/12-volt-conversion Great tutorial! Do you have the wiring tutorial? Also, I thought alternators had built-in voltage regulation. You mention a separate voltage regulator. Quote Link to comment Share on other sites More sharing options...
Sam Buchanan Posted March 18, 2020 Report Share Posted March 18, 2020 (edited) 7 minutes ago, Bob Riding said: Great tutorial! Do you have the wiring tutorial? Also, I thought alternators had built-in voltage regulation. You mention a separate voltage regulator. Sniper wanted a MoPar alternator. The Delco one-wire alternators sold by the vendor I linked do not need an external regulator. The installation for the one-wire units is very simple, just connect the alternator output to the lead that is presently on the regulator "Bat" terminal. That's it.....ammeter will still work normally. The old regulator can be tossed on the workbench or remain in the car to look purty....your choice. Edited March 18, 2020 by Sam Buchanan Quote Link to comment Share on other sites More sharing options...
Sniper Posted March 18, 2020 Report Share Posted March 18, 2020 (edited) 2 hours ago, Bob Riding said: Great tutorial! Do you have the wiring tutorial? Also, I thought alternators had built-in voltage regulation. You mention a separate voltage regulator. Thanks, I don't have a wiring tutorial on this swap because it's the same as any other Mopar swap to this type alternator, such as converting my 65 Cuda from the older single field connection mechanical regulator to the newer dual field connection electronic regulator like the 87 Diplomat alternator donor. I do not like internal regulator conversions. If the alternator dies you are stuck and I drive my cars regularly, as daily drivers. So I like parts I can get off the shelf. Here's a link to a site that talks about wiring up the type of regulator I have. http://www.mymopar.com/charging.htm Edited March 18, 2020 by Sniper more info Quote Link to comment Share on other sites More sharing options...
laynrubber Posted June 13, 2020 Report Share Posted June 13, 2020 This is an alt from a 68 Mustang and the external regulator is from the same. Quote Link to comment Share on other sites More sharing options...
MarkAubuchon Posted June 16, 2020 Author Report Share Posted June 16, 2020 Just spoke with George Asche, His main business is alternators and generators. They are going to start making units for old mopars. I placed my order Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.