Jump to content

A little clutch help please


homer41

Recommended Posts

I am putting a new clutch in my total restoration of my 41 Plymouth. It is a stock rebuild. I bought a new leather seal/cover and do not know how it is attached to the bellhousing I know it is rivited to the clutch fork.  Any help would be appreciated,    dave

Link to comment
Share on other sites

On 1/16/2020 at 9:45 AM, homer41 said:

I am putting a new clutch in my total restoration of my 41 Plymouth. It is a stock rebuild. I bought a new leather seal/cover and do not know how it is attached to the bellhousing I know it is rivited to the clutch fork.  Any help would be appreciated,    dave

Reused the original metal frame for this one.  You could TIG weld on new tabs if yours are broken off. 
 

 

Link to comment
Share on other sites

I made my own, will know soon if it works. I made it from a piece of .050 sheet with tabs inside and outside, the inside ones bent in and around the opening of the bellhousing the outside ones bend around the leather boot base. So far it is good, will know when I bend the outers around the boot. Maybe in a few days.  Dave

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Terms of Use