Evan and the Fargo Kew Posted September 6, 2019 Report Share Posted September 6, 2019 Help needed please. Hi all, thanks in advance for any assistant!! I am am new to the world of car restoration. I love the history of vintage vehicles and there are so many deserving machines out there that need love. I have inherited a Fargo Kew and super excited to get started. It’s a little daunting to be honest. But first of all I would love to find out a touch more about my truck. Im not sure what’s under the bonnet or what year it is. Sourcing parts will another challenge. Happy to admit I’m a full newbie but hoping to tap into the wealth of knowledge of this forum. Thanks again ? Quote Link to comment Share on other sites More sharing options...
Evan and the Fargo Kew Posted September 6, 2019 Author Report Share Posted September 6, 2019 Quote Link to comment Share on other sites More sharing options...
Evan and the Fargo Kew Posted September 6, 2019 Author Report Share Posted September 6, 2019 3 Quote Link to comment Share on other sites More sharing options...
HotRodTractor Posted September 6, 2019 Report Share Posted September 6, 2019 That thing is cool! What part of the world are you in? That would help the forum point you towards a parts supplier. You definitely have a flathead mopar of some variety. Generally they lump into 2 main categories based on the length of the head. 23" and 25" - measuring that will help you get to the right parts. Also there is a pad on the left side of the block at the top below the head towards the front of the engine - it will have a number stamped on it of some variety - that will likely help as well. 1 Quote Link to comment Share on other sites More sharing options...
Evan and the Fargo Kew Posted September 6, 2019 Author Report Share Posted September 6, 2019 Thanks so much for that HotRodTractor. I am in Australia. Just waiting to have the truck transported to me and I’ll start investigating ? Quote Link to comment Share on other sites More sharing options...
Andydodge Posted September 6, 2019 Report Share Posted September 6, 2019 (edited) From the background trees I'd say they are Gum or Eucalypt trees so I'm guessing here in Oz.....lol..........was right.......lol............the pad HRT refers to is above the welch plug, to the left of the oil filler tube.........I'd say the truck is a mid 50's UK sourced model.......whether it was actually sold as a "KEW" I am unaware of but that "KEW" term was used here in Oz to refer to any side valve six mopar engine in both cars and trucks. This was as a result of the 25" long engines being supplied from Canada, part of the British Commonwealth and subject to lower customs dutes apparently ordered through the Kew works in the UK, note the "Kew Gardens" reference on the data plate..............this "Kew" term was only used as far as I know here in Oz and completely confuses anyone in North America so I would not use it when or if chasing parts in the USA..........here in Oz the 25" long DeSoto/Chrysler based, Canadian sourced engines are the ones that should only be referred to as being "Kew" engines as they generally had "KEW" stamped into the start of the engine number on that pad that HRT refers to.............the shorter Dodge or Plymouth USA sourced 23" long engines didn't have "KEW" in the engine number...........both engines look almost identical and unless a tape measure is placed along the length of the cylinder head to determine whether its 23 or 25 inches are almost impossible to pick.........each engine family had slightly different bore & strokes so its important to correctly determine what you have ...........engine parts generally are the same whether used in a car or truck within each 23 or 25 " series however as your truck appears to be a fairly large one, maybe 8-10 ton or more anything else maybe quite specific to the truck lines............the Data plate says its an F125 so I'd use that as a basis to make inquiries............anyway welcome aboard...........I'm in South Grafton NSW and am happy to help if needed..........02 66 425963..........Andy Douglas Edited September 6, 2019 by Andydodge 2 Quote Link to comment Share on other sites More sharing options...
Andydodge Posted September 6, 2019 Report Share Posted September 6, 2019 Just realised you had not posted on the Truck side of the Forum......I'd strongly suggest doing so as they may have info that may help............andyd 1 Quote Link to comment Share on other sites More sharing options...
Evan and the Fargo Kew Posted September 6, 2019 Author Report Share Posted September 6, 2019 Thanks Andy you’re an absolute legend!! Will definitely pick your brain if that’s ok. I’m on the Central Coast just above Sydney. Will have to freight a few cases of beer up!! Quote Link to comment Share on other sites More sharing options...
Evan and the Fargo Kew Posted September 6, 2019 Author Report Share Posted September 6, 2019 Help needed please. Hi all, thanks in advance for any assistant!! I am am new to the world of car restoration. I love the history of vintage vehicles and there are so many deserving machines out there that need love. I have inherited a Fargo Kew and super excited to get started. It’s a little daunting to be honest. But first of all I would love to find out a touch more about my truck. Im not sure what’s under the bonnet or what year it is. Sourcing parts will another challenge. Happy to admit I’m a full newbie but hoping to tap into the wealth of knowledge of this forum. Thanks again ? Quote Link to comment Share on other sites More sharing options...
Evan and the Fargo Kew Posted September 6, 2019 Author Report Share Posted September 6, 2019 Quote Link to comment Share on other sites More sharing options...
Reg Evans Posted September 6, 2019 Report Share Posted September 6, 2019 Interesting grill , hood and windshield. I like it a lot ! Quote Link to comment Share on other sites More sharing options...
Evan and the Fargo Kew Posted September 6, 2019 Author Report Share Posted September 6, 2019 Thanks Reg! Apparently it’s a parrot nose. 1 Quote Link to comment Share on other sites More sharing options...
The Oil Soup Posted September 7, 2019 Report Share Posted September 7, 2019 Here is a link to ID the engine, not sure it will work for Fargo but worth a try. The engine number is above the generator just below the head on a milled flat. Hope it helps. http://www.t137.com/registry/help/otherengines/otherengines.php 1 Quote Link to comment Share on other sites More sharing options...
Andydodge Posted September 7, 2019 Report Share Posted September 7, 2019 Evan.I found these two pics in Gavin Farmers book, Great Ideas In Motion, Chryslers Australian History 1946-1981........these are the only pics I can find of your type of truck which appears to have been released in Oz in 1949 and available until the mid 50's although the book is not very clear in this regard and it would seem that these trucks were the large capacity models, the smaller US sourced "Pilothouse" models were the 1/2 ton and upwards till the mid 50's .......I dunno if any of this helps or confuses the issue........lol.........andyd Quote Link to comment Share on other sites More sharing options...
Evan and the Fargo Kew Posted September 7, 2019 Author Report Share Posted September 7, 2019 Hahaha wow! Love the history. I’ll be looking to convert to a shortbed and hopefully put smaller wheels on to bring him closer to the ground. Thank you so much for looking Andyd!! ?? Quote Link to comment Share on other sites More sharing options...
Andydodge Posted September 7, 2019 Report Share Posted September 7, 2019 This is a couple of pics of the same type of truck, these were sold in Oz from 1949/1950 till I think the mid 50's and were available with both Dodge and Fargo badging bodies were apparently made by the Briggs Motor Bodies Co in the UK and were the Chrysler Australia large truck range...........andyd Quote Link to comment Share on other sites More sharing options...
pflaming Posted September 7, 2019 Report Share Posted September 7, 2019 Those two rear cab windows are interesting. Never seen that before. 1 Quote Link to comment Share on other sites More sharing options...
greg g Posted September 7, 2019 Report Share Posted September 7, 2019 From what I read some where, maybe on the AllPar site. The Kew works imported what were know as knock downs.. Parts escaped taxes placed on assembled vehicles. The knock downs were then assembled into complete vehicles the move on to sellers in Britain or other Commonwealth markets. So Chrysler save taxes in England, and then England taxed the exports... Sounds like the beginnings of that taxation without representation that caused problems in the late 1700's. Quote Link to comment Share on other sites More sharing options...
Andydodge Posted September 7, 2019 Report Share Posted September 7, 2019 (edited) Greg.........lol...........you could be right, tho' as I understand it, the reasoning was that the Commonwealth countries would give each other concessions on the duties and taxes for exports/imports between each other and the US and/or Canadian orders would garner a better rate if done thru the Limeys/Kippers/Poms in Kew..........tho' Chrysler Australia has gone up the proverbial getting the true facts would be nigh on impossible and the Gavin Farmer Book that I reference is full of inaccuracies or at the very least, poor research.............lol..........andyd Edited September 7, 2019 by Andydodge Quote Link to comment Share on other sites More sharing options...
Radarsonwheels Posted September 7, 2019 Report Share Posted September 7, 2019 Awesome truck! Do you have a plan or vision for what you want out of it? 1 Quote Link to comment Share on other sites More sharing options...
Tony WestOZ Posted September 9, 2019 Report Share Posted September 9, 2019 Hi all, Here is some production data. These Kew trucks made in Kew England and then imported to Australia. I am not sure if they were complete or knock down form. I never had a lot of info on this series of trucks but I will have a look through some of my old hard drives and see what I can find. Unless it was too lost in the crash of 2011. Tony 1 Quote Link to comment Share on other sites More sharing options...
Evan and the Fargo Kew Posted September 9, 2019 Author Report Share Posted September 9, 2019 (edited) On 9/8/2019 at 1:13 AM, Radarsonwheels said: Awesome truck! Do you have a plan or vision for what you want out of it? Yes definitely! Hard to explain in writing. But I’m a purest and want to keep as much as I can original. Bagged with a timber shortbed tray. I love the patina so will be sealing it. Also interested to hear about what products people have used for this Edited September 9, 2019 by Evan and the Fargo Kew Quote Link to comment Share on other sites More sharing options...
Evan and the Fargo Kew Posted September 9, 2019 Author Report Share Posted September 9, 2019 Thanks so much Tony! I appreciate it Quote Link to comment Share on other sites More sharing options...
Tony WestOZ Posted September 9, 2019 Report Share Posted September 9, 2019 I found this scan in my files. As it turns out I have the rest of the parts manual to go with it. Strangely I did not scan the whole book when I did my other manuals. It will take me some time but I will scan into some form and let you know if you want a copy. Tony 1 Quote Link to comment Share on other sites More sharing options...
Evan and the Fargo Kew Posted September 9, 2019 Author Report Share Posted September 9, 2019 Tony that would be absolutely amazing!! Thank you very much!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.