Jump to content

MOPAR model 61 heater


Recommended Posts

Welcome to the forum.

 

The inlet is the top pipe on the heater core, which connects to the valve at the back of the cylinder head, and should be marked with cast letters "heater" on the head.

The outlet pipe is on the bottom, which connects to the nipple on top of the water pump. 

Edited by John-T-53
Link to comment
Share on other sites

Thanks for your help, I appreciate it.

I have a temperature cable hanging lose on the inside of the firewall, so I assume I should be looking for an engine mounted cable operated heater valve for the back of the cylinder head. Any thoughts?

Link to comment
Share on other sites

The first picture is the cable operated valve that was on my B4C. The second is the valve on my P18. Seems to be a fairly common valve . I've seen them NOS on eBay, but expensive. I may have an old used one if you can't find a new valve.

DSC00132.jpg

DSC08853.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Terms of Use